The most ridiculous iPhone 6s and 6s Plus case designs ever

With the iPhone 6S and 6S Plus, Samsung took on one of the most popular and expensive smartphone cases ever.

The company took on the idea of making the case look like it had been cut from a giant slab of plastic.

The idea was a great one, and the results are the most ridiculous Apple case designs I’ve seen.

The design is a mishmash of various components, each with its own purpose.

You can see some of the parts on the back of the case below, but it’s worth taking a look at the whole thing to see what you’re missing out on.

First, the back.

It’s a simple, black, matte-black plastic, like you’d find in a normal smartphone case.

But on the inside of the phone, it’s lined with a thin, thin plastic layer.

Samsung has done this to help ensure the case doesn’t scratch your iPhone.

Second, the display.

It comes in a variety of colors, and each color is made from a different layer of plastic that’s bonded to the case.

The case itself is thin and thin, with a thickness of around 0.1mm, which is very thin.

It makes it incredibly light, making it ideal for use in the car or when riding your bike.

It also has a slightly larger display than the iPhone, which means the phone doesn’t get as much battery life.

Finally, the speakers.

These speakers are quite big, and they’re mounted on an outer surface of the plastic, which adds a bit of bulk to the device.

The biggest downside to the design is that they’re so large that they’ll make it difficult to use the iPhone with the iPhone 5S or 5C, even with an adapter.

If you’re not using the iPhone as much as you might want to, it may be a bit harder to fit the phone into the case, but that’s a minor inconvenience.

It all looks pretty cool, so let’s get to the pictures.

The back The back of Samsung’s case looks very much like a slab of solid plastic.

You’ll notice that there’s a single layer of polycarbonate, which Samsung says is a thin layer of foam, and which helps reduce glare.

But what Samsung is missing is the back glass.

The display is glued onto a layer of glass, and on the front of the display, the speaker is glued to the backglass.

The phone is covered with a thick layer of clear plastic that looks very similar to the plastic used in your laptop’s hard drive.

The only real difference is that the iPhone’s display is actually a lot smaller.

It measures 3.2mm thick, and there’s no clear plastic on the iPhone.

The front of Samsung also has some plastic on it, but the edges are painted black.

The speaker and display are attached to the rear of the device, which also has clear plastic covering it.

The bottom of the back has a couple of holes that Samsung says are used to secure the speakers, and those holes are also covered in clear plastic.

A couple of screws hold the case together, but this design allows for some flexibility.

The side cover, the power button, and headphone jack are all held on with plastic.

It looks like a typical smartphone case, and it’s actually fairly easy to remove, although the case is rather heavy.

The top of the screen The bottom part of the Samsung case is very similar in shape to the iPhone display, but its very small and makes it impossible to reach.

Samsung uses a thin piece of foam as the front cover, but as you can see from the pictures below, it doesn’t have much thickness.

The screen itself is a bit thinner than the screen of an iPhone 5 or 5S, and as you’ll see below, there’s even less material on it.

This is the area where you’ll find the speakers and the headphone jack.

The first thing you’ll notice about the front is the absence of the speaker.

The headphone jack is also absent from this design.

There are two small screws on either side of the camera shutter that hold the camera’s lens in place.

The hole is drilled for a small screwdriver, but Samsung doesn’t include one in the box.

The next part of Samsung is what you might think of as the screen, and this part is actually made up of a layer that is similar to glass.

This part is used to mount the front camera to the screen.

Samsung says it has designed the screen to be extremely thin, and to have the camera lens stay securely in place without touching the glass.

It feels a little more like glass, though.

There’s also a small hole drilled through the top of this screen, which holds the battery tray.

The holes on the outside of the battery cover allow for a few extra screws to be used to hold it in place, so you can use it with a screwdriver or something similar.

The other part of this device is what’s called the backside. The iPhone