How to buy a good antenna.
The antenna that I want to buy for my home is a 4K TV antenna.
If I wanted to have a decent antenna for the outdoor, I would need to get a 4k TV antenna with a higher gain (for example, a 20x20mm).
I am going to show you how to get an antenna that works well with a 4.7GHz frequency, a 3.5GHz frequency and a 4GHz frequency.
If you don’t know what a 4G LTE is, then you probably should.
LTE is the technology that uses the frequencies of a smartphone network to make data transfer faster and more reliable.
I want to be able to use the same antenna to get LTE, so I am going do a basic test on my home wifi network.
First, let’s get an idea of how high I want the antenna to go.
I am just going to use a 1 meter antenna to start, then I will adjust the antenna’s gain until it is 1 meter.
The antenna should now have the same size and the same level of performance.
The next step is to set the antenna up.
I will go ahead and mount the antenna on the side of the home where I want it to sit.
It is also a good idea to mount the antennas on the back wall of the house, where it will have the least resistance to the elements.
After mounting the antenna, I will mount the coaxial cable that connects it to the router.
I would recommend going with an inexpensive coaxial antenna.
Next, I am about to install the antenna.
First, I’m going to connect the antenna in series to the wireless router.
Then I will connect the coax cable to the back of the router to make sure it is secured.
I then will mount it.
In this video I am also going to take a closer look at the antenna itself.
Now, I want my antenna to work properly, so you can see how to adjust the antennas gain to match the antenna I am using.
Here is a video I made of me adjusting the antenna gain so it is a 1.5 meter antenna.
This is going to make the antenna much stronger.
On the right is the antenna mount I used to mount my antenna.
In this video, you can also see how I made adjustments to the antenna antenna gain.
When I finished adjusting the gain, I took the antenna and turned it upside down.
Once the antenna is inverted, I could see how well the antenna works.
I also found that if you put the antenna at the same distance from the router as your TV, it worked very well.
You can see that I can see the antenna going in to the wall with the TV and the router and out to the outside.
Finally, you’ll see that the antenna has an acceptable level of reception.
Thanks to the excellent work of the internet, I can now use my 4G wireless router to get more of the signal.